{"id":128012,"date":"2023-08-23T15:47:38","date_gmt":"2023-08-23T14:47:38","guid":{"rendered":"https:\/\/www.mby.com\/?p=128012"},"modified":"2023-08-23T15:47:38","modified_gmt":"2023-08-23T14:47:38","slug":"best-hybrid-diesel-electric-boats","status":"publish","type":"post","link":"https:\/\/www.mby.com\/features\/best-hybrid-diesel-electric-boats-128012","title":{"rendered":"Best hybrid diesel electric boats: The best of both worlds?"},"content":"The 2014 Southampton Boat Show glowed with a dazzling array of polished fibre-glass hulls glinting in the sunlight. From the latest sleek sportscruisers to towering gin palaces and even a superyacht or two, it was enough to make even a budding oligarch drool.\r\n\r\nBut incredible as these modern wonders were, none of them grabbed my attention as much as a 113-year-old gentleman\u2019s motor launch called Wise Folly<\/em>. It was being exhibited by Dennett Boat Builders after a full restoration by the company\u2019s craftsmen. I had no inkling that meeting them would be the start of a life-changing adventure.\r\n\r\nThe reason Wise Folly<\/em> had caught my eye was because I\u2019d come to the show to look for inspiration and advice on how to restore my own classic boat at the time, Little Ann II<\/em>.\r\n\r\n[jwplayer key=\"mClI5oA6\"]\r\n\r\nShe had been built in 1946 by William Osborne and was a 26ft Swift Junior class design. Unfortunately Little Ann<\/em> had developed dry rot in the hull above the waterline and leaks in the roof and superstructure.\r\n\r\nAt the time, I knew very little about wooden boats. Little Ann had been, if not an impulse buy, certainly a rash and rushed purchase. I had decided that I wanted to propose to my husband-to-be on a boat. But not just any old boat; my own boat.\r\n\r\nDespite having had little experience at sea, I have been attracted to boats since I was a child. One of my earliest memories is of taking the helm of a little wooden speedboat on holiday in Italy.\r\n\r\nArticle continues below...<\/em>\r\n\r\n
\r\n\r\n[collection]\r\n\r\n
\r\n\r\nI still remember the feeling of pride and excitement of being at the helm, a feeling I was desperate to rekindle. I approached the Dennett stand and got chatting to David Cherrett. I explained that I wasn\u2019t looking to buy Wise Folly<\/em> but was looking for inspiration to restore my own boat.\r\n\r\nHe offered me a cup of tea, and despite not really liking tea (I am Belgian by birth), I accepted because it was an opportunity to pick his brains while trying to decide if they were the right people to carry out Little Ann II<\/em>\u2019s restoration.\r\n\r\nSpurred on by my determination to propose on the boat \u2013 under Tower Bridge was my plan \u2013 I soon decided they were the team I needed. The project would be supervised by Stephen Dennett himself.\r\n\r\nBeing curious by nature, I couldn\u2019t resist popping down to the Dennett boatyard in Chertsey to check on the progress on weekends. It wasn\u2019t long before Steve noticed my enthusiasm and, thrusting a tool into my hands, set me to work on Little Ann<\/em> myself.\r\n\r\nAs an amateur, it took me a lot of hard work to achieve anything like the results the professionals around me managed with apparent ease, but I was grateful for the opportunity to observe and learn from them.\r\n

Father figures<\/strong><\/h2>\r\nLearning a new craft is always a thrill and I wasted no time in telling my family. But while I am naturally gregarious, my father had always been a man of few words.\r\n\r\nPraise of any kind was sparse so when I excitedly explained that Little Ann II<\/em> was a 1946 rebuild of the original Little Ann<\/em>, which had been lost in the war, his response was less than enthusiastic. \u201cSo, it\u2019s not a historic boat then. And it\u2019s made of wood. You may as well throw \u00a350 notes into the river!\u201d he cautioned.\r\n\r\nUp to a point, he was right \u2013 these boats are costly to maintain \u2013 but what he didn\u2019t appreciate is that the peace and contentment I feel when I\u2019m on the water is priceless.\r\n\r\nBut his words still nagged at me. No matter how old one gets, a son still craves the approval of his father. And I desperately wanted it. I decided that the answer was not to give up boating \u2013 that would be unimaginable \u2013 but to find a boat with real history and a story that would impress even my father.\r\n\r\nBoats like this are notorious for requiring a great deal of work but the restoration undertaken of Little Ann<\/em> had proved such a positive experience that I relished the challenge, especially if Dennett agreed to undertake another project with me. All that was needed was a boat worthy of the work and expense...\r\n\r\n[caption id=\"attachment_129634\" align=\"alignnone\" width=\"630\"]\"\" How Breda<\/em> looked when Alain first set eyes on her[\/caption]\r\n

Dunkirk survivor<\/strong><\/h2>\r\nThen, in the summer of 2017, we found her. Breda<\/em>, a bona fide Dunkirk Little Ship, was in a terrible state. She was rotting away at her mooring on the Thames, unloved and taking on rain water. In her time she\u2019d rescued so many but now she was in need of rescuing.\r\n\r\nOriginally named Dab II<\/em>, she was designed and built in 1931 by J W Brooke & Co of Oulton Broad, Norfolk for George Smart of Westcliff-on-Sea. By the outbreak of war in 1939 she was owned by a Colonel Hardy.\r\n\r\nWhen the Colonel discovered that the Royal Navy had commandeered his motor yacht for use in Operation Dynamo \u2013 the heroic effort to rescue troops stranded on the beaches of Dunkirk \u2013 he was outraged. Not because they had taken his yacht but because he had not been given the chance to go along with her!\r\n\r\n[caption id=\"attachment_129633\" align=\"alignnone\" width=\"630\"]\"\" Although Breda<\/em> made it to Dennetts on her own bottom she was not in a good state[\/caption]\r\n\r\nInstead, she was captained by Lieut R.W. Thompson and crossed the Channel an impressive three times in six days. On the final return journey, she rescued a group of Dutch soldiers from Breda in the Netherlands. They had fought a gallant rearguard action on the retreat to Dunkirk, driven by the weight of the German advance.\r\n\r\nWhen Colonel Hardy was finally reunited with his yacht at the end of the war, he renamed her Breda<\/em> in honour of the soldiers she saved on that final voyage. This was a boat with a pedigree and a history not even my father could fault, even if it meant a lot more \u00a350 notes leaving my wallet!\r\n\r\nI bought her in October 2017 but didn\u2019t tell my dad at the time as I wanted to surprise him once the restoration was complete. Thankfully, Stephen Dennett was as excited as I was and agreed to take it on. It was the start of a three-year adventure.\r\n\r\n[caption id=\"attachment_129643\" align=\"alignnone\" width=\"630\"]\"\" 35 planks and 53 ribs had to be replaced to make her hull and topsides secure again[\/caption]\r\n

Work begins<\/strong><\/h2>\r\nBy December, Breda<\/em> was on their slipway ready for inspection. It was soon apparent that a major overhaul would be necessary, including urgent repairs to her hull, before she was seaworthy again.\r\n\r\nIt wasn\u2019t just the few planks and a hull paint I was hoping for, so the boatyard worked with me to establish a scope and timeline to suit my budget, and once again gave me the opportunity to work on the boat myself under their guidance as my time permitted.\r\n\r\nIt had to be carefully planned and timetabled. As hoped, I proposed to my boyfriend Michael aboard Little Ann II<\/em> and was delighted when he accepted. We intended to get married in the summer of 2018 so we had to work everything around that.\r\n\r\n[caption id=\"attachment_129636\" align=\"alignnone\" width=\"630\"]\"\" Dennett\u2019s craftsmen used all their skills to bring Breda back[\/caption]\r\n\r\nA summary of the work required included replacing 19 ribs, 18 planks and 15 deck beams on the starboard side; 34 ribs, 17 planks and 15 deck beams port side; gunwale and beam shelves on both sides; a full aft cabin rebuild and transom replacement.\r\n\r\nThis was a much bigger project than I had initially imagined and I needed to find further funding, not only to ensure the boatyard was always paid on time, phase by phase, but also because if I was to do Breda<\/em> justice \u2013 and make her comfortable, practical, safe and future proof for navigating at sea \u2013 it would require considerable investment.\r\n\r\nAs well as the hull restoration, I also needed to budget for appliances like an ice cube maker and wine fridge, and bespoke top-of-the-range mattresses. And of course the latest navigation electronics. All of this would have to be powered by a state-of-the-art power system. This was the only way Breda<\/em> would be able to be enjoyed for generations to come.\r\n\r\n[caption id=\"attachment_129638\" align=\"alignnone\" width=\"630\"]\"\" 30 deck beams also needed replacing before the deck could be relaid and the new wheelhouse added[\/caption]\r\n\r\nSo at the start of 2018 I decided to go all in! I sold my small London property to fund the project in its entirety. Obviously, I didn\u2019t dare tell my father, rather I hoped the end result would speak for itself.\r\n\r\nBy April 2018, with vital hull repairs complete, Breda<\/em> was put back in the water to make way for the usual summer rush of boats needing immediate attention at the yard. Meanwhile, work continued on her engines and fuel systems so she could be lifted back onto the slipway over winter where her interior rebuild would begin.\r\n\r\nDuring the summer, Parker Marine Services came and emptied the four diesel tanks totalling 900 litres so the fuel could be polished, the tanks cleaned and the hoses, seals and senders replaced.\r\n\r\n\"\"\r\n\r\nNew oil and fuel filters had to be sourced as the original parts for the two Ford Sabre 135hp six-cylinder engines were no longer available. Once these were installed and the injectors cleaned, the two blue monsters were soon purring contentedly again.\r\n\r\nOther summer work included removing all the bronze items so they could be polished and chromed by Andrew Burt at Antique Metal Restorations in Chobham. The metal stanchions were also removed, sandblasted and repainted.\r\n\r\nFinally, keen to not lose any of my recently acquired varnishing skills, I kept my hand in by personally restoring and varnishing a little desk seat that we discovered inside Breda<\/em>.\r\n\r\n[caption id=\"attachment_129649\" align=\"alignnone\" width=\"630\"]\"\" The new wheelhouse had to be rebuilt from scratch to suit her original 1930s styling[\/caption]\r\n\r\nIt was looking very sad and abandoned in a corner, with old maritime charts still inside it. However, with a bit of elbow grease, I soon had it looking much happier and ready to go back on board.\r\n

Design for life<\/strong><\/h2>\r\nWinter saw the start of the second phase of the restoration. The major part of this would be the redesign of the forward spaces. I wanted the interior of the boat to reflect its Art Deco origins, with plenty of period-appropriate fixtures and fittings.\r\n\r\nBut first there were more structural tasks to take care of. All 151 of the original teak planks on the foredeck were removed, numbered, documented and restored ready for refitting. By October the new beam shelves had also been installed and the entire hull stripped back to bare wood, ready to be undercoated, primed and repainted.\r\n\r\n[caption id=\"attachment_129646\" align=\"alignnone\" width=\"630\"]\"\" The rotten transom also had to be stripped and rebuilt while Breda<\/em> was out of the water[\/caption]\r\n\r\nIn November we secured the deck beams and made them ready to receive the tongue-and-groove ceiling. Lastly, we added two layers of marine ply and an epoxy sheathing over the entire structure, making it weatherproof for decades to come.\r\n\r\nThe new year heralded the start of another phase in the project, the Art Deco-inspired interior. Heather Dennett had taken my complex specifications and translated them into a sumptuous design, which her team of skilled carpenters and finishers could begin to create.\r\n\r\nHeather\u2019s design made subtle changes to my initial ideas to allow for more practical movement around the boat. She explained how a central corridor would be important to move quickly around the ship when under way and advised a more symmetrical layout with a centre aisle. I agreed.\r\n\r\n\"\"\r\n\r\nHaving subsequently taken Breda<\/em> across the English Channel<\/a> in some challenging weather conditions, I\u2019m glad I did. Luckily none of these practical changes meant I had to give up on the espresso bar or the ice-cube maker!\r\n\r\nBreda<\/em> may have been pressed into wartime service in her early days \u2013 a role she played with distinction \u2013 but in her old age she would be returning to her original role as a gentleman\u2019s pleasure yacht.\r\n\r\nThis meant comfortable living quarters for us and our guests. Forward, just behind the anchor chain locker would be a wet room with a rain shower and period fittings. This would lead into the guest cabin with two berths and ample storage space.\r\n\r\n[caption id=\"attachment_129650\" align=\"alignnone\" width=\"630\"]\"\" The new mahogany wheelhouse structure before the roof and glazing were added[\/caption]\r\n\r\nNext would be the owner's cabin<\/a>, with a double berth panelled in varnished walnut and a vanity desk in mahogany and burr walnut. Throughout, antiqued mirrors would create the illusion of a bigger space.\r\n\r\nEach berth was fitted with headboards composed of mahogany, burr maple, and burr walnut inserts arranged in an Art Deco fan shape, edged with polished metal borders. A round chest of drawers would offer plenty of storage and the bedside table would contain discrete technology, allowing us to charge a mobile phone wirelessly.\r\n\r\nThe clever design balanced the appearance of 1930s style and luxury with the convenience of modern equipment in a seamless integration.\r\n\r\n[caption id=\"attachment_129651\" align=\"alignnone\" width=\"630\"]\"\" Once weatherproof, the focus switched to fitting out the interior of the wheelhouse[\/caption]\r\n

Wheelhouse reinvention<\/strong><\/h2>\r\nIn June 2019, the final phase began: rebuilding the wheelhouse<\/a>. This was remade from scratch out of mahogany, conforming to the original dimensions. The only modification we made was to enlarge the sunroof to allow for easy removal of the engines if we ever needed to replace them in the future.\r\n\r\nJune was chiefly devoted to varnishing the forward areas and the main structure. So was July. And August. To this day, the first question most visitors ask is: \u201cHow many coats of varnish did this take?\u201d To be honest, I lost count.\r\n\r\nVarnishing complete, Dennett\u2019s carpenters could begin to fit out the galley and saloon with two bars, which they built chiefly of mahogany and burr walnut. The floors were English oak with deco-style mahogany inlays.\r\n\r\n[caption id=\"attachment_129641\" align=\"alignnone\" width=\"630\"]\"\" The original helm was a pretty basic affair so Dennetts recreated a new one using traditional analogue dials but modern electronics. Alain did much of the wiring himself[\/caption]\r\n\r\nIn September we began installing her complex electrical and navigational equipment as well as her new batteries and power management systems<\/a>.\r\n\r\nI personally spent five months laying over a mile of Oceanflex 12V cable, and then connecting every device and light fitting that required power. By the end of 2019 the dual Raymarine Axiom<\/a> MFDs, VHF, AIS<\/a> and Autopilot were commissioned.\r\n\r\nI also hired Alasdair Flint from Arthur Beale (the oldest surviving chandlery in London) to reproduce all the rigging on Breda<\/em>. From the stanchions\u2019 wires to the big 30ft mast and all the flag ropes, he did an exceptional job of it.\r\n\r\n[caption id=\"attachment_129658\" align=\"alignnone\" width=\"630\"]\"\" Every fixture and fitting was either restored or replaced with a period alternative[\/caption]\r\n

Best in show<\/strong><\/h2>\r\nBy early 2020 the bulk of the restoration was complete and we were ready to participate in the 80th anniversary commemorations of Operation Dynamo.\r\n\r\nWhile we had deliberately not set a deadline on the project, this had always been our \u2018emotional\u2019 deadline so I was thrilled that she would now be able take her place in the procession of other surviving Dunkirk Little Ships for this special anniversary.\r\n\r\nUnfortunately, this was also when we started hearing rumours of a new virus emerging from China. As with so many other events, the commemoration was cancelled and work on Breda<\/em> stalled too as the world went into lockdown.\r\n\r\n[caption id=\"attachment_129660\" align=\"alignnone\" width=\"630\"]\"\" The long foredeck makes the perfect place to sit and admire the view with a glass of bubbly[\/caption]\r\n\r\nBut after two lost years, the adventure has continued and Breda<\/em>\u2019s epic restoration is complete. In 2021, Breda<\/em> won Best in Show at the Thames Traditional Boat Festival in Henley and was chosen as one of the three National Historic Ship UK flagships.\r\n\r\nShe has since become a regular fixture at the Thames Traditional Boat Show and has participated in several Veterans\u2019 Day events.\r\n\r\nMy husband Michael and I have become enthusiastic members of the Association of Dunkirk Little Ships (ADLS) where we have met a whole community of people who, like us, are dedicated custodians of rescued and restored Little Ships.\r\n\r\n[caption id=\"attachment_129661\" align=\"alignnone\" width=\"630\"]\"\" The finished wheelhouse is a feast of varnished mahogany and polished chrome[\/caption]\r\n\r\nAlthough the official Operation Dynamo commemoration will have to wait until the 85th anniversary in 2025, in 2022, a small flotilla of Dunkirk Little Ships, accompanied by a documentary film crew, visited Dunkirk and were warmly welcomed by the mayor who had arranged for a full pipe band on the dockside to play us in.\r\n\r\nIt is a reminder of how much it still means to the people of that city. It is one of the many reasons I am so proud to be the custodian of this brave and beautiful little ship.\r\n

Mother\u2019s pride<\/strong><\/h2>\r\nMy only regret is that my father, whose original criticism drove me to take on this project, did not live to see it completed. Illness took him away much sooner than we hoped but my mother, who is 80, was able to come on board Breda<\/em> for the first time last summer when we cruised to Oostende Voor Anker.\r\n\r\n[caption id=\"attachment_129662\" align=\"alignnone\" width=\"630\"]\"\" The bar with its backlit Art Deco panels and hidden ice maker is as stylish as it is practical[\/caption]\r\n\r\nAfter inspecting every part of the boat, opening drawers and cupboards, and scrutinising the varnished floorboard and period fittings, she concluded after a long moment of silence (very unlike her!) that she was now unsure whether I was even more obsessed with details than my late father.\r\n\r\nI took this as the confirmation that my dad would have been equally proud of what we have achieved with Breda<\/em>\u2019s restoration. I am just privileged to be part of her continuing story and look forward to celebrating her 100th birthday in seven years\u2019 time.\r\n\r\nIn the meantime, I will take great pleasure in enjoying this incredible boat out on the water, cutting through the waves, where I am happiest and I know Breda<\/em> is too.\r\n\r\n[caption id=\"attachment_129664\" align=\"alignnone\" width=\"630\"]\"\" The finished saloon with its folding dining table and central walkway is a triumph[\/caption]\r\n\r\nIf you\u2019d like to experience her unique charms too, we are making Breda<\/em> available for bespoke charters on the Upper Thames around the Windsor area to try and offset some of the costs and ensure that her rich history can continue long into the future.\r\n\r\nFirst published in the November 2023 issue of MBY.<\/em> For information about taking your own cruise aboard Breda, visit www.bredacruises.co.uk<\/a><\/em>\r\n\r\n
\r\n\r\n

If you enjoyed this...<\/strong><\/h3>\r\nBe first to all the latest boats, gadgets, cruising ideas, buying advice and readers' adventures with a subscription to Motor Boat & Yachting<\/em>. Available in both print and digital formats, our monthly magazine will be sent directly to your home or device at a substantial discount to the usual cover price. See our latest offers<\/a> and save at least 30% off the cover price.\r\n\r\n
","excerpt":{"rendered":"

Electric boats have spread throughout the boating world at a rapid pace over the past few years, but what if you\u2019re not ready to ditch the diesel just yet? Well, that’s where the best hybrid diesel electric boats come in. Not to be confused with the best hybrid bay boats, these hybrid electric boats combine […]<\/p>\n","protected":false},"author":3321,"featured_media":128015,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1492],"tags":[],"review_manufacturer":[117,116,359,457,1838,2026,318],"acf":[],"introduction":[""],"_links":{"self":[{"href":"https:\/\/www.mby.com\/wp-json\/wp\/v2\/posts\/128012"}],"collection":[{"href":"https:\/\/www.mby.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.mby.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.mby.com\/wp-json\/wp\/v2\/users\/3321"}],"replies":[{"embeddable":true,"href":"https:\/\/www.mby.com\/wp-json\/wp\/v2\/comments?post=128012"}],"version-history":[{"count":3,"href":"https:\/\/www.mby.com\/wp-json\/wp\/v2\/posts\/128012\/revisions"}],"predecessor-version":[{"id":128016,"href":"https:\/\/www.mby.com\/wp-json\/wp\/v2\/posts\/128012\/revisions\/128016"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.mby.com\/wp-json\/wp\/v2\/media\/128015"}],"wp:attachment":[{"href":"https:\/\/www.mby.com\/wp-json\/wp\/v2\/media?parent=128012"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.mby.com\/wp-json\/wp\/v2\/categories?post=128012"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.mby.com\/wp-json\/wp\/v2\/tags?post=128012"},{"taxonomy":"review_manufacturer","embeddable":true,"href":"https:\/\/www.mby.com\/wp-json\/wp\/v2\/review_manufacturer?post=128012"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}